WIRELESS TALLY SOLUTIONS

TALLY ANYTHING, ANYWHERE!

TALLY-MA is a wireless tally solution built by field users that know your needs. Compatible with Blackmagic ATEM, StudioCoast vMix, OBS, NewTek Tricaster, Bitfocus Companion, TSL3.1, TSL 5.0 and anything that can trigger HTTP / UDP requests, the TALLY-MA Wireless tally is the simplest way to get whatever you need tallying.

Bring your own 2.4Ghz Wi-Fi gear, choose your power source, run the server software, and you are set to go!

Needing more than what the Wi-Fi range can give you?

Free yourself from the Wi-Fi range by using our newest “Cloud” mode that enables your Tally to be used anywhere as long as it can have internet access! Hook up a Tally to your mobile phone hotspot and roam around wherever you want while having a fast and reliable Tally signal! Also, it’s a great solution for tallying remote production signals!

Follow our Facebook Page for updates, info, and connect with other TALLY-MA Users!

Manual Download

BUY

COMPATIBILITY

All models
Bitfocus Companion
As an autonomous Tally Server and GPI input interface (only on ARM64 Raspberry OS)
Other systems compatible with Tally Arbiter software
Raw Panel & Reactor 2.0
Roland Smart Tally
For legacy switchers

Make it stand out.

For your camera operator or your talent, a camera Tally is always a powerful feature to have.

Knowing where to look at, if you are on-air or even just for general awareness that the camera is live, having a Tally light can take your production to the next professional level.

Live Tally lights have been around a long time on professional-grade equipment. But, most of the time, they are only compatible with legacy systems or between the same brand products, making them costly and not widely available. TALLY-MA is here to change that, making Tally available for any production size.

Avoid unwanted camera movements while on air by letting the operator be sure he is live, or relieve the stress out of the show’s talent by making them know what camera they should look at all the time. You will feel the difference when taking on a new production challenge.

The ability to display LIVE / preview Tally or any other signal in a custom color brings flexibility to the system, meaning that you can also Tally microphones, streaming or recording data on your TALLY-MA wireless Tally.

Now also available the possibility to display Tally through the cloud, as long as you can provide the Tally with an internet access Wi-Fi network for unlimited Tally mobility.

BUY

How does it work?

You need to pair each tally to the IPv4 network where your system works. That same network has to have a 2.4Ghz Wi-Fi router or access point that the TALLY-MA can reach. After pairing, you just need to run the server software on a machine of the same network, configure it to interface with your video system, choose your tally preferences, and you are good to go!

Here’s an example of a connection diagram for ATEM switchers. The same logic applies to other systems:

The tally server can also run on a Raspberry Pi device for a headless and more portable device that can go with your mobile setup. (64bit Raspberry Operating System. Pre-built and configured SD card image available for download)

Watch our example video on how to connect your tally to the WiFi Network:

If you purchased you tally before 17/Oct/2022 or want to review the old (hotspot) configuration method, you can access it on Tally-MA Wifi Setup Demo

Setup your TALLY-MA devices easily by sending your WiFi credentials to the device via the USB cable. This reduces your setup time even more and provides some stress-free experience when you want to change WiFi networks or configure devices in bulk!

Cloud enabled. If you need it.

It’s possible to feed your tally signal virtually anywhere, by using cloud mode. If you need extra range than your WiFi is providing or you need to move your camera to an off-site location, we got you covered.

Jake will walk you through it:

Bitfocus Companion Feedbacks

Control your device via Companion Feedbacks without the need to add a tally specific module. This enables any feedback from any existing module, as in the Stream Deck.

Feedbacks control the tally device!

SNUG POWER PORT

The Micro USB power port is recessed inside the Tally to prevent accidental disconnections during operation. Bring your own existing cable or purchase some tight-fit tested!
1/4" SCREW FEMALE MOUNT

Allows the usage of 1/4” adapters and mounts through the built-in female thread. Mount your tally however you need.
DUAL-ZONE LIGHTING

Each led is individually controlled to display any RGB color. For easier usage we have created two independent light zones: One for the talent (front side of the tally) and other for the operator (rear side of the tally). Display preview tally only on the operator side, blackout the front of the tally, “call” alerts for the operator, you choose how to use it!
CLOUD-ENABLED - FOR REAL MOBILITY

Whenever distance is a challenge, or there is the need for Tallying a remote signal, TALLY-MA has the answer. New Cloud mode enables you to hook the Tally to a mobile phone hotspot Wi-Fi network and provide you reliable and fast Tally signal on the go while using a minimal amount of data.